What do we need?

We wish to decorate interior and/ or exterior surfaces of buildings without paint requirement.

How do we do it?

The decoration will be done with the application of THRAKON colored organic coatings which will impart color coverings in different styles.

Products used

GLX 494 Prim

DEC 428 Polyplast

DEC 431 Fine

DEC 429 Silicate

DEC 437 Si & Si

DEC 438 Silicone

DEC 428 Polyplast

Step by step

We ensure smooth final surfaces, clean and free from lumps. Large unevenness and cracks in the substrate must be repaired.

Necessary plastered surfaces of components with 3 layers system (spray-basic-final) or 2 layers system (spray – one layer plaster) of THRAKON and let it dry completely. Finally we repair any defects.

Depending on the desired texture of the final surface and the manufacturing requirements choose the corresponding coating (see. decorative coating table):

Before applying the organic plaster surfaces should be primed with the acrylic primer GLX 494 Prim which must be painted in the color of the final coating.

Application of organic topcoat:

First spread on the surface and then the excess material is removed so that the thickness of the layer corresponds to the grain size. Depending on the style of the coating, use stainless steel or plastic spatula.

The coating is applied with a plastic spatula to properly achieve the desired style and avoid any discoloration of the final surface. The application process requires coordinated the workshop mode of the method to be followed “wet-on-wet” without interruption in continuous surfaces. Otherwise if  first coat dries on the surface before and after apply fresh material on the surface following will be noticeable discolorations on splices. Therefore, it must ensure that enough artificial application at every point of the scaffolding and take into account the weather conditions because they affect the drying time of the material.

Note: In cold weather and high humidity, drying time is lengthened while at high temperatures with low humidity the drying time is slowed.

Product Categories : ETICS & Facade Products