{"id":894,"count":19,"description":"Waterproofing for all applications: Roof waterproofing with or without slopes, basements, wet (damp) areas (bathroom, WC), potable water tanks etc.\r\n\r\n<strong>Rules for proper waterproofing<\/strong>\r\n\r\nMake sure that surfaces are clean and free from loose impurities, salts, oils and other contaminants.\r\n\r\nRemove projections and burrs, polyurethane or other soft materials.\r\n\r\nCut bars protruding at depth 1,5 - 2,0 cm.\r\n\r\nClose all holes or cracks with fast setting repair mortar THRAKON WRM 520 or WRM 500 (according to the situation).\r\n\r\nMake sure when you apply the product that the water does not run into the substrate.\r\n\r\nPour water on the surface until saturation and remove excess water.\r\n\r\nThe first coat should be applied with the brush. Make sure that the product covers all the gaps.\r\n\r\nWhen the first coat is finished and before it dries completely, apply crosswise the second one, also by brush.\r\n\r\nIf required, the first level should be watered beforehand.\r\nDuring, and three hours after application of the product, the ambient temperature should not be below + 5\u00baC.\r\nApplication on substrates exposed to direct sunlight, very high temperatures (over + 30\u00baC) or during strong winds is not advised.\r\nYou may not apply in rain or frost conditions.","link":"https:\/\/www.thrakon.gr\/en\/application_category\/waterproofing\/","name":"Waterproofing","slug":"waterproofing","taxonomy":"application_cat","parent":0,"meta":[],"acf":[],"_links":{"self":[{"href":"https:\/\/www.thrakon.gr\/en\/wp-json\/wp\/v2\/application_cat\/894","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.thrakon.gr\/en\/wp-json\/wp\/v2\/application_cat"}],"about":[{"href":"https:\/\/www.thrakon.gr\/en\/wp-json\/wp\/v2\/taxonomies\/application_cat"}],"wp:post_type":[{"href":"https:\/\/www.thrakon.gr\/en\/wp-json\/wp\/v2\/application?application_cat=894"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}