Technical Support +30 2103633512 Mon - Fri: 9:00 - 17:00

CLIMAPLUS STICK GUN

One component polyurethane gun foam

Gun-type polyurethane foam, with low expansion, for excellent adhesion to thermal insulation boards (XPS and EPS)

Color
White
Packaging
800ml Minimum consumption for thermal insulation boards adhesion: 14m2/can
Downloads:
EXTERNAL THERMAL INSULATION SYSTEMS - CLIMAPLUS
CLIMAPLUS STICK GUN

Description

CLIMAPLUS STICK PU foam adhesive provides strong adhesion to thermal insulation boards (XPS & EPS) for faster application. Instant adhesion and wall plugging within 2 hours. It is an ideal combination of a value for money product with high performance in a ready-to-use can. High yield up to 55lt (depending on temperature & humidity). Minimum consumption for thermal insulation boards adhesion: 14m2/can. Minimum expansion during drying period and no further expansion & shrinkage after drying, which provides excellent leveling of the system. A lighter material compared to other materials used in thermal insulation systems, thus not giving extra weight to the construction. Fire Class: B3 according to DIN 4102. Usable even at low temperature like 0°C. Environmentally friendly as does not contain any propellant gases which are harmful to the environment.

Application Fields

  • Best for mounting thermal insulation systems and filling voids during adhesive application
  • Ideal for wooden type construction materials adhesion to concrete, metal etc.
  • Applications needed minimum expansion such as thermal insulation, isolation for frames of windows and doors etc.

Advantages

  • Minimum expansion during drying period and no further expansion & shrinkage after drying, which provides excellent leveling of the system
  • Excellent leveling
  • Strong adhesion to thermal insulation boards (XPS & EPS)
  • High performance in a ready-to-use can
  • Fire Class: B3 according to DIN 4102

Implementation Steps

  • Canister temperature +5°C (recommended +20°C). Application temperature (applies to environment) recommended from 0°C to +30°C.
  • Shake the canister well before use.
  • Remove the cap and screw the adopter firmly onto the valve.
  • Always keep the can upside down during application.
  • Fresh foam can be removed immediately with PU cleaners and cured foam can be removed only mechanically.