Solutions
Detachment of tiles in floors
Solutions
Detachment of tiles in floors
POTENTIAL CAUSES OF THE PROBLEM
- An absorbent substrate can lead to adhesive failure.
- Improper application or a complete lack of primer can cause issues.
- Choosing the wrong adhesive can result in problems.
- Moisture can infiltrate the substrate due to cracked grout.
- Applying the adhesive in unsuitable conditions (such as temperatures exceeding 35 °C) is not advisable.
- Allowing the adhesive to remain on the application surface for too long before laying tiles may lead to failure.
Product Categories
SOLUTION
STEP 1
Carefully peel off the adhesive from underneath the plate as well as from the surface where it will be applied.
STEP 2
Ensure the substrate is cleared of any loose debris and powder.
STEP 3
If local repairs are needed, they can be done using repairing plaster WRM 550 for masonry and repairing mortar REPIFIX WRM 525 for floors.
STEP 4
Prime the application surface with high-penetrating acrylic primer GLX 292 FLEX PRIM.
STEP 5
Use the appropriate tile adhesive based on the application (wall or floor) and the type of tile.
STEP 6
Apply porcelain grout texture LUX GROUTECH FMF 160.
Products Used