Solutions

Bulges and mold on the ceiling

Solutions

Bulges and mold on the ceiling

Technical Support +30 2103633512 Mon - Fri: 9:00 - 17:00

POTENTIAL CAUSES OF THE PROBLEM

Moisture behind the surface of the color is derived from one of the following reasons:

a) Leaks inside the wall
b) Lack of waterproofing on the roof
c) A series of hairline cracks caused moisture to enter behind the color
d) Increased moisture in the surroundings

Product Categories

SOLUTION

STEP 1 To protect the floor, cover the entire area that will be painted.
STEP 2 Thoroughly clean the surface of dust and loose particles using a spatula. Sand the surface with sandpaper for an even finish.
STEP 3 When necessary, STATUS 100% ACRYLIC PUTTY is applied and rubbed with sandpaper after it dries.
STEP 4 Application of deep penetration primer, GLX 292 FLEX PRIM, with a brush or roller.
STEP 5 Once the primer has dried for 5 to 6 hours, apply STATUS KITCHEN & BATH to the entire surface.
STEP 6 After 4 to 5 hours, apply a second layer of STATUS KITCHEN & BATH.

Products Used

Emulsion Paints / Tinted Bases STATUS KITCHEN & BATH
Antimould high quality emulsion paint
MICROCEMENT DECOR GLX 292 FLEX PRIM
High penetration micronized acrylic primer