Step 1

Before applying, ensure that the surface is clean, dry, robust and free from dust, mold and grease.

Step 2

Remove damaged, or peeling old paint.

Step 3

Where putting is required, use the STATUS 100% ACRYLIC PUTTY and after drying, sand with sandpaper and dust thoroughly. If there are large cracks, use the ready-to-use white stucco STATUS ONE COVER, fill the cracks applying just one coat without sanding. On new surfaces, prime with STATUS ACRYLIC PRIMER, or STATUS DUR WATER before the application. In the case of fresh plaster or cement, let the surface dry thoroughly for at least one month before painting. For plasterboard and for the repainting of hydrocolored surfaces (with lime or glue) or soiled surfaces (nicotine, soot from heaters, soot, fumes, coffee, juice, graffiti, inks, markers, mildew, mold, moisture, oil, etc.), prime with STATUS DUR before the application. Do not paint surfaces that may contain moisture. First make sure that the cause of the moisture stopped and that the surface is completely dry.

Step 4

Stir well the contents of the container before use, dilute properly and apply 1-2 coats of paint.

Step 5

Apply the second coat at least 2-3 hours after the first.

Step 6

After the application close the container tightly to maintain the paint in good condition for future use. You can store undiluted paint in a tightly sealed container for extended periods of time, without affecting the quality of the product.

Step 7

The paint surface is recommended not to be washed for the first 20 to 30 days after the application. On new surfaces of plaster or concrete paint after 30-40 days.