FLEX HYDROSTOP DSF 300
Elastomeric waterproofing membrane
Color
Light blue
Packaging
In 5 & 20 Kg plastic containers
Consumption
1,6-2 kg/m2 for two layer application. It depends on surface
Downloads:
Description
DSF 300 Flex Hydrostop is a flexible, brushable, elastomeric, single component waterproofing emulsion for waterproofing jointless and with no connections substrates, vertical or horizontal surfaces. Suitable for indoor and outdoor applications. The surfaces coated with product DSF 300 is absolutely waterproof.
Application Fields
- Used for a roof waterproofing, plastered walls, slush grouts
- The product is highly elastic and adequate for surfaces presenting contractions-expansions and vibration
- Applied on concrete, plaster, porous concrete and other common sub-layers based on cement or ceramic
Advantages
- Non-toxic and does not develop fungi
- The product is highly resistant to humidity, ultraviolet radiation and does not flake
- The surfaces coated with DSF 300 Flex Hydrostop, due to their whiteness reflect solar radiation thus the transmission of heat to the buildings’ interior. It is adequate for cracks up to 1mm
- It does not chip off and develop fungi
- Prevents diffusion of solar heat
Implementation Steps
- The substrate must be dry, solid, stable and free of dust, dirt, oil, grease and loose particles.
- DSF 300 Flex Hydrostop is applied in two layers by brush or roller.
- Before application of DSF 300 Flex Hydrostop the substrate is primed with acrylic primer THRAKON DSF 305 or GLX 292 FLEX PRIM.
- Remove oil and grease before application of DSF 300 Flex Hydrostop on metal surfaces. A suitable anti rust primer should be applied to prevent rust formation. DSF 300 Flex Hydrostop is applied in a first undiluted coat with a roller or a brush. After complete drying a second undiluted coat is applied.Do not apply DSF 300 Flex Hydrostop on wet and damp surfaces.
- During and till after 3 hours from the application of the product the ambient temperature should not be below +5˚C. Do not dilute DSF 300 Flex Hydrostop with water or mix it with other material.
- Stir well the product with an electric mixer before application.
- Do not apply DSF 300 Flex Hydrostop in direct sunlight, very high temperatures (over 30˚C) and strong wind.
- Avoid working under rain or frozen substrates.
Storage
In a dry environment at temperatures above 0C for 12 months its production date.