Technical Support +30 2103633512 Mon - Fri: 9:00 - 17:00

ROOF SEALER FLX 380

Waterproofing Emulsion

Acrylic based

Color
White, terracotta
Packaging
1kg. 5kg, 12kg plastic containers
Consumption
1 kg/m² per two layer application depending on the type of the surface
WATERPROOFING
ROOF SEALER FLX 380

Description

FLX 380 ROOF SEALER is a one-component, brushable, elastomer, acrylic waterproofing emulsion. It is white, non-toxic and does not develop fungi. The product is highly resistant to humidity, ultraviolet radiation and does not flake. It is suitable for application on concrete, plaster, AAC concrete and other common substrates based on cement or ceramic. The product is highly elastic and it is highly recommended for surfaces presenting contractions-expansions and vibrations. The surfaces that are coated with FLX 380 ROOF SEALER become absolutely waterproof. Moreover, the surfaces coated FLX 380 ROOF SEALER, due to their whiteness reflect solar radiation limiting thus the heat transmission to the buildings’ interior.

Application Fields

  • The product is used for sealing rooftops, balconies, plastered walls, cement-based floor screeds, gutters, etc
  • Also used for sealing corners, filling fine cracks of up to a width of 1mm and filling tile joints up to a width of 1mm
  • It is suitable for application to substrates such as: cement-based floor screeds, concrete, bricks, tiles, aluminum, bitumen coated aluminum, tin, wood, etc

Advantages

  • Perfect sealing
  • High elasticity
  • Resistance to humidity
  • Resistance to UV radiation
  • Adequate for cracks up to 1mm
  • Does not chip off
  • Prevents diffusion of solar heat
  • Does not develop fungi
  • Non toxic
  • Economic solution for perfect result

Implementation Steps

  • In order to achieve adequate waterproofing the product is applied in to two layers.
  • The first layer is diluted to 30 – 40 % with water while the second is applied with undiluted or if necessary is diluted up to 10%.
  • For application by airless spray gun it is diluted with water 20 – 30%. The application is made by brush, roller or spray gun making sure the product to enter and fill each gap.
  • Do not wet the surfaces for two days after application. Do not apply in low temperatures (below 10°C).

Storage

It is stored for one year in sealed packaging and in dry and well ventilated areas under temperatures +5C to +35C.

WATERPROOFING CRYSTALLINE ADMIX DSF 315

CRYSTALLINE ADMIX DSF 315 is an integral crystalline admixture powder specifically formulated to interact with concrete capillary pore structures to provide a waterproofing system that is a permanent part of the concrete matrix.