Step 1

The surface should necessarily be clean, dry, rigid and free from dust, mold and oil before application. Remove all loose or peeled old paints. If stucco is required, use STATUS 100% ACRYLIC PUTTY and after it has dried, sand and wipe well. In case of big cracks, use only one layer of the Light, White ready for use STATUS ONE COVER putty. No need for smoothing. New surfaces should be primed with STATUS ACRYLIC PRIMER, STATUS AQUADUR or GLX 292 FLEX PRIM. In case of fresh plaster or concrete, let it dry deep for at least 1 month before application. If you want to paint gyp-sum boards or apply an additional layer of water paint (with lime or adhesive) or paint dirty surfaces (nicotine, smut from radiators, smog, exhaust fumes, coffee, juice, graffiti, ink, marker, fungi, mold, humidity, oil, etc.), first apply STATUS DUR primer.

Step 2

Mix well the content of the container before use. Add the amount of STATUS EMULSION COLOURANT required for achieving the desired shade to the container of the white paint.

Step 3

Then stir well the content to achieve absolute and homogeneous incorporation of the basic shades into the final mixture.

Step 4

After application close the container well to preserve in good condition for future use. It can be stored in a tightly closed container without problems for a long time as long as it is not diluted.

Step 5

Painted surfaces should not be washed for at least 20-30 days after application. New plaster or concrete surfaces should be painted after 30-40 days.