Solutions

Detachment of tiles in floors

Solutions

Detachment of tiles in floors

Technical Support +30 2103633512 Mon - Fri: 9:00 - 17:00

POTENTIAL CAUSES OF THE PROBLEM

  • An absorbent substrate can lead to adhesive failure.
  • Improper application or a complete lack of primer can cause issues.
  • Choosing the wrong adhesive can result in problems.
  • Moisture can infiltrate the substrate due to cracked grout.
  • Applying the adhesive in unsuitable conditions (such as temperatures exceeding 35 °C) is not advisable.
  • Allowing the adhesive to remain on the application surface for too long before laying tiles may lead to failure.

Product Categories

SOLUTION

STEP 1 Carefully peel off the adhesive from underneath the plate as well as from the surface where it will be applied.
STEP 2 Ensure the substrate is cleared of any loose debris and powder.
STEP 3 If local repairs are needed, they can be done using repairing plaster WRM 550 for masonry and repairing mortar REPIFIX WRM 525 for floors.
STEP 4 Prime the application surface with high-penetrating acrylic primer GLX 292 FLEX PRIM.
STEP 5 Use the appropriate tile adhesive based on the application (wall or floor) and the type of tile.
STEP 6 Apply porcelain grout texture LUX GROUTECH FMF 160.

Products Used

REPAIRING MORTARS REPIFIX FAST WRM 550
Fast setting repairing plaster
REPAIRING MORTARS REPIFIX POWER WRM 525
High strength, fiber reinforced, repairing mortar R4
MICROCEMENT DECOR GLX 292 FLEX PRIM
High penetration micronized acrylic primer