Λύσεις
Moisture and mold on exterior walls (DEV)
Λύσεις
Moisture and mold on exterior walls (DEV)
+30 2103633512 Potential causes of the problem
a) Increased moisture due to lack of insulation
b) The paint was exposed to high solar radiation
c) Heavy contraction on the substrate, which could not follow the paint, as it was not resilient
Κατηγορίες Προϊόντων
Δε βρέθηκαν κατηγορίες
Solution
ΒΗΜΑ 1
Check the surface thoroughly for loose parts of paint
ΒΗΜΑ 2
If there are loose particles, frayed or peeling old paint, remove them with a metal spatula
ΒΗΜΑ 3
Clean the surface thoroughly from dust. This stage is important for the correct restoration
ΒΗΜΑ 4
Check for signs of where the wall has been hit and paint has been removed
ΒΗΜΑ 5
Small irregularities are fixed with STATUS 100% ACRYLIC PUTTY, applied with a metal spatula. For larger gaps, use lightweight acrylic stucco STATUS ONE COVER, which is soft and easy to work, does not need sanding and can be painted as soon as the surface dries. STATUS ONE COVER does not drip and is ideal for filling joints, cracks and all kinds of openings at thickness up to 3cm, with one pass
ΒΗΜΑ 6
Application of the deep penetration primer, GLX 292 FLEX PRIM
ΒΗΜΑ 7
After 4-5 hours and when the primer has dried, apply the elastomeric insulating paint STATUS ALL WEATHER in exterior walls with a roller or brush. Allow the first layer to thoroughly dry and after 24 hours apply the second layer
ΒΗΜΑ 8
STATUS ALL WEATHER prevents the formation of mold, and is resistant to retaining dirt. It has a special composition with integrated UV filters, while it creates an elastic membrane that covers all the hairline cracks and remains flexible without cracking or peeling.
Products Used
