Solutions

Moisture problems, mold on ceilings, walls and structural elements (columns, beams)

Solutions

Moisture problems, mold on ceilings, walls and structural elements (columns, beams)

Technical Support +30 2103633512 Mon - Fri: 9:00 - 17:00

POTENTIAL CAUSES OF THE PROBLEM

  • Poor room ventilation
  • Collection of high moisture content in the field
  • Moisture problems from the exterior walls

Product Categories

SOLUTION

STEP 1 Rub the surface and remove loose parts.
STEP 2 Good cleaning of the surface.
STEP 3 Prime the surface of the application with quartz sand primer GLX 298 PREMIUM.
STEP 4 Application of thermal insulation plates on the surface, gluing them with CLIMABOND THC 403 adhesive.
STEP 5 Application of pegs for holding thermal insulation plates.
STEP 6 Apply the first layer of fiber-reinforced base coat, FIBERPLUS THC 405.
STEP 7 As long as FIBERPLUS THC 405 is still wet, firmly put CLIMAPLUS fiberglass mesh (160 g/m²).
STEP 8 Then, apply a second layer of fiber-reinforced base coat, FIBERPLUS THC 405, to completely cover the mesh.
STEP 9 Prime the application surface with the colored acrylic primer GLX 494 CLIMA PRIMER.
STEP 10 Apply the organic acrylic-based top coating CLIMA PLASTER DEC 428, tinted to the required shade chosen from the CLIMAPLUS fan deck.
STEP 11 ATTENTION: If the application is in a seaside area or an area with high moisture content, THRAKON recommends our silicone system. In such a case, proceed to the following steps: a) Prime the surface with the colored silicone-based primer GLX 498 CLIMASIL PRIMER. b) Application of organic silicone-based top coating CLIMASIL PLASTER DEC 438, tinted to the required shade chosen from the CLIMAPLUS fan deck.

Products Used