Solutions

Soundproofing problems

Solutions

Soundproofing problems

Technical Support +30 2103633512 Mon - Fri: 9:00 - 17:00

POTENTIAL CAUSES OF THE PROBLEM

  • Poor soundproofing of the house

Product Categories

SOLUTION

STEP 1 Rub the surface and remove loose parts.
STEP 2 Prime the surface of application with quartz sand primer GLX 298 PREMIUM.
STEP 3 Application of thermal insulation plates on the surface, gluing them with CLIMABOND THC 403 adhesive. In this case, it is strongly suggested that the application of ULTRAPOR EPS 200.
STEP 4 Application of pegs for holding thermal insulation plates.
STEP 5 Apply the first layer of fiber-reinforced base coat, FIBERPLUS THC 405.
STEP 6 As long as FIBERPLUS THC 405 is still wet, firmly put CLIMAPLUS fiberglass mesh (160 g/m²).
STEP 7 Then apply a second layer of fiber-reinforced base coat, FIBERPLUS THC 405, to completely cover the mesh.
STEP 8 Prime the application surface with the colored acrylic primer GLX 494 CLIMA PRIMER.
STEP 9 Apply the organic acrylic-based top coating CLIMA PLASTER DEC 428, tinted to the required shade chosen from the CLIMAPLUS fan deck.
STEP 10 ATTENTION: If the application is in a seaside area or an area with high moisture content, THRAKON suggests the application of our silicone system. In such a case, proceed to the following steps: a) Prime the surface with the colored silicone-based primer GLX 498 CLIMASIL PRIMER. b) Application of organic silicone-based top coating CLIMASIL PLASTER DEC 438, tinted to the required shade chosen from the CLIMAPLUS fan deck.

Products Used