Solutions
Soundproofing problems
Solutions
Soundproofing problems
POTENTIAL CAUSES OF THE PROBLEM
- Poor soundproofing of the house
Product Categories
SOLUTION
STEP 1
Rub the surface and remove loose parts.
STEP 2
Prime the surface of application with quartz sand primer GLX 298 PREMIUM.
STEP 3
Application of thermal insulation plates on the surface, gluing them with CLIMABOND THC 403 adhesive. In this case, it is strongly suggested that the application of ULTRAPOR EPS 200.
STEP 4
Application of pegs for holding thermal insulation plates.
STEP 5
Apply the first layer of fiber-reinforced base coat, FIBERPLUS THC 405.
STEP 6
As long as FIBERPLUS THC 405 is still wet, firmly put CLIMAPLUS fiberglass mesh (160 g/m²).
STEP 7
Then apply a second layer of fiber-reinforced base coat, FIBERPLUS THC 405, to completely cover the mesh.
STEP 8
Prime the application surface with the colored acrylic primer GLX 494 CLIMA PRIMER.
STEP 9
Apply the organic acrylic-based top coating CLIMA PLASTER DEC 428, tinted to the required shade chosen from the CLIMAPLUS fan deck.
STEP 10
ATTENTION: If the application is in a seaside area or an area with high moisture content, THRAKON suggests the application of our silicone system. In such a case, proceed to the following steps: a) Prime the surface with the colored silicone-based primer GLX 498 CLIMASIL PRIMER. b) Application of organic silicone-based top coating CLIMASIL PLASTER DEC 438, tinted to the required shade chosen from the CLIMAPLUS fan deck.
Products Used