Technical Support +30 2103633512 Mon - Fri: 9:00 - 17:00

EPOXY GROUTECH FMF 155

2-component epoxy grout & tile adhesive

High resistance for special structures and business areas

Color
See FMF 155 colorchart
Packaging
3 kg (A: 2.82 kg - B: 0.18 kg)
Certifications:
Downloads:
TILE ADHESIVES - GROUTS
EPOXY GROUTECH FMF 155

Description

FMF 155 is a two component (A+B) epoxy solvent-free tile grout, suitable for filling joints 2-12mm. After hardening it exhibits high mechanical strength (compressive, flexural, friction), resistance to weathering, resistance to acids, alkalis and many organic solvents, water and saline water.

 

Application Fields

  • Suitable for grouting tiles in swimming pools, industrial floors, slaughter houses,breweries, dairy, food processing or chemical plants, hospitals or residences, etc.
  • Suitable for grouting of clay tiles, ceramic tiles, ceramic inlays, decorative elements made of grid – bonded inlays, ceramic slabs and other ceramic materials etc
  • Suitable for grouting the tile gaps between 2-12 mm. After curing, it ensures high mechanical strength (compression, flexural, adhesion), resistance to weather conditions, resistance to acids, alkali and several organic solvents, as well as to water or saline water
  • Suitable for grouting on layers such as concrete, lightweight concrete, coatings, cement screeds, self-leveling floors, etc

Advantages

  • It is suitable for grouting tiles in swimming pools, industrial floor tiles i.e. slaughter houses, breweries, dairy, food processing or chemical plants, hospitals or residences
  • It has excellent workability and it is easily cleaned with water before hardening
  • Combined with special tiles for industrial use

Implementation Steps

  • The joints must be dry, free of dust, dirt, oils, or greasy substances, and clear of loose materials and friable particles. If there are layers of paint or tile adhesive residues, these must also be removed.
  • FMF 155 is supplied as a two-component product (A and B) in a predetermined ratio, which are mixed just before use. Pour the entire contents of component B (hardener) into the container of component A (resin).
  • Mix thoroughly using a low-speed drill (300 rpm) for 5 minutes until a homogeneous paste is formed. After mixing, the mixture has a pot life of approximately 45 minutes at 20°C.
  • After mixing, apply the product in sections over clean joints (without adhesive residues or dust) by pulling it across, using a rubber or flexible metal trowel diagonal to the direction of the joints. In this way, the excess material is removed.
  • The minimal amount of material remaining on the surface is emulsified by rubbing it with a slightly damp sponge and must be cleaned within 45 minutes (at 20°C). The use of lukewarm water facilitates cleaning. At higher temperatures, cleaning must be done more quickly. Once the grout sets, it becomes very difficult to clean and can only be removed by mechanical means; therefore, it is essential to clean the tools immediately after use.
  • At low temperatures, the product loses its workability and reaction times increase. Conversely, high temperatures extend the workability time

Storage

In a dry environment at temperatures above 0C for 12 months its production date.

TILE ADHESIVES - GROUTS SUPER ELASTIC VKW 132

SUPER ELASTIC VKW 132 is a highly flexible, two-component adhesive for tiles, suitable for the most demanding bonding and for the application of tiles on existing tiling, even on vibrating surfaces.

TILE ADHESIVES - GROUTS VINYL VKW 122

VINYL VKW 122 is a thin-layer adhesive for absorbent and non-absorbent tiles based on cement and modified with polymer additives for use on both horizontal and vertical surfaces.