Solutions

Widespread cracked plasters repairing

Solutions

Widespread cracked plasters repairing

Technical Support +30 2103633512 Mon - Fri: 9:00 - 17:00

POTENTIAL CAUSES OF THE PROBLEM

  • Application of base coat plaster in a thick layer,
  • Strong contractions in the substrate
  • Plaster without fiberglass
  • Normal cracking after an earthquake
  • Possible coatings application with improper weather conditions

Product Categories

SOLUTION

STEP 1 Rub the surface and remove loose parts.
STEP 2 Good cleaning of the surface.
STEP 3 Application of fast-setting repairing mortar REPIFIX WRM 520.
STEP 4 Priming of the surface with deep penetration acrylic primer GLX 292 FLEX PRIM.
STEP 5 Apply the first layer of fi ber-reinforced, base coat, THC 410.
STEP 6 As long as THC 410 is still wet, firmly put CLIMAPLUS fiberglass mesh (160 g/m²).
STEP 7 Then, apply a second layer of fiber-reinforced base coat, THC 410, to completely cover the mesh.
STEP 8 Prime the surface of application with the colored acrylic primer GLX 494 PRIM.
STEP 9 Apply the organic acrylic-based top coating DEC 428, tinted to the required shade chosen from the CLIMAPLUS fan deck.
STEP 10 **IMPORTANT NOTICE:** If the application is in a seaside area or a location with high moisture content, THRAKON recommends using our silicone system. In this case, please follow these steps: 1. Prime the surface with the colored silicone-based primer GLX 498 CLIMASIL PRIMER. 2. Apply the organic silicone-based top coating DEC 438, tinted to the desired shade selected from the CLIMAPLUS fan deck.

Products Used