Solutions

Detachment of plasters

Solutions

Detachment of plasters

Technical Support +30 2103633512 Mon - Fri: 9:00 - 17:00

POTENTIAL CAUSES OF THE PROBLEM

  • Strain from the weather: Moisture can corrode mud over time.
  • The application was performed at a high temperature, resulting in poor adhesion between plaster layers.
  • Inadequate material selection.
  • Ingress of moisture into the substrate due to cracks.
  • Application under unsuitable conditions (temperature > 35 °C).

Product Categories

SOLUTION

STEP 1 Firstly, all crumbling parts of plaster are removed with a spatula, and the surface is cleaned off with a brush.
STEP 2 Prime the surface with the deep penetration primer GLX 292 FLEX PRIM.
STEP 3 Application of REPIFIX RAPID WRM 520, which is fast-setting, on the surface of application. Wait 20 minutes for it to dry.
STEP 4 Application of REPIFIX TOP WRM 483 is a cementitious putty, ideal for applications on concrete.
STEP 5 As soon as REPIFIX TOP WRM 483 dries, proceed to the rubbing of the surface.
STEP 6 Application of the deep penetration primer, GLX 292 FLEX PRIMER.
STEP 7 Paint the surface with STATUS ALL WEATHER in two coats.

Products Used

MICROCEMENT DECOR GLX 292 FLEX PRIM
High penetration micronized acrylic primer
Repairing Mortars REPIFIX RAPID+ WRM 520
Fast setting repairing mortar
Acrylic Paints / Tinted Bases STATUS ALL WEATHER
Elastomeric Waterproof Facade Paint