Applications
Stone wall / Marble flooring
Applications
Stone wall / Marble flooring
+30 2103633512 Product Categories
What do we need?
Roller, trowel, brush, sponge, notched and stainless-steel finishing trowel, cloth.
STEPS
STEP 1
Surface Preparation: HYDRO R is applied to clean, dry and sound surfaces, free from dust, grease, loose materials and any contaminants that may affect its penetration. Before application, it is recommended to protect adjacent surfaces such as painted walls, frames, joint sealants and bituminous surfaces.
STEP 2
Application: Apply HYDRO R evenly by spray, brush or roller in one or two coats using the “wet-on-wet” method to achieve deep impregnation and effective hydrophobic protection without forming a surface film.
On highly absorbent substrates, a second coat is recommended before the first coat dries, in order to maximize penetration and protective performance.
After application, protect the surface from rainfall for at least 4 hours at +20°C.
Once fully cured, HYDRO R provides long-term water-repellent protection, significantly reduces water absorption and salt efflorescence, protects against frost damage and chloride penetration, while maintaining substrate vapour permeability and preserving the aesthetic appearance of the surface.
STEP 3
Protection of Tile / Marble Flooring: NANOSHIELD O is applied to clean, dry and sound surfaces, free from dust, contaminants, oils, loose materials and particles.
Apply evenly by spray, brush or roller until the surface is saturated, ensuring deep penetration and effective protection without forming a surface film.
Before the product has completely dried and within approximately 15 minutes of application, remove any excess material with a clean, damp cloth to ensure a uniform aesthetic finish.
On highly absorbent substrates, a second coat is recommended before the first coat has fully dried to achieve maximum impregnation and protection.
After full curing, completed in approximately 48 hours, the product provides high resistance to oily stains, moisture and salts, protecting both absorbent and non-absorbent surfaces without significantly altering their appearance or vapour permeability.
Products Used
