AntiSlip
Non-Slip varnish 2-component
Transparent, non-slip, 2-component varnish for indoor and outdoor use with strong adhesion, high resistance to abrasion and to chemical agents. It provides excellent waterproofing and protection to any kind of structural elements.
 Enlargement
|
AntiSlip
Description
Transparent, non-slip, 2-component varnish for indoor and outdoor use with strong adhesion, high resistance to abrasion and to chemical agents. It provides excellent waterproofing and protection to any kind of structural elements. It creates an anti-slip surface, even when it is wet. Its special composition contains UV filters against ultraviolet radiation, providing protection of shades and styles due to the fact that it doesn’t get yellowish or discolored with time.
Application Fields
- Suitable for creation of non-slip surface even when it is wet, sealing and protection of any kind of structural element
- Recommended for microcement systems, cementitious substrates, wood, metal, natural stone, for surfaces with standing water, showers, swimming pools, tiles, stair steps, stairs, balconies, corridors, loading ramps, etc
Advantages
- Creation of non-slip surface
- Suitable for indoor and outdoor applications
- Resistance to water and neutral cleaners
- Resistance to UV radiation
- Polishes and protects
- Does not peel
- Easy and fast application
- High adhesion to the substrate
- Economic solution for perfect result
- Very low consumption
Application Steps
The surface must necessarily be clean, dry and free of dust and mould before application.
Step 2Mix the hardener (component B) with all the resin (component A). For better stirring it is recommended the use of an electric stirrer at low speed for 2-3 minutes. Stirring should be done carefully from the bottom to the top and to the container walls. Before use allow the mixture to settle for a few minutes.
Step 3For the application use a roller in 1-2 layers. For best protection you should apply a second layer within 24 hours, depending on the application temperature conditions.
Step 4Dries within 5-6 hours, so as not to stick.
Step 5Drying times refer to normal ambient conditions (25ºC, 60% humidity). Each next layer should be applied within 24 hours from the previous one. Any differences in temperature and humidity can change the above times.
Storage
Store in sealed containers in a dry environment at temperatures between +5°C and +35°C for 24 months from date of production.