Brushable Polyurethane based elastic membrane (1K)
Polyurethane membrane has bubbles at some points of application
POTENTIAL CAUSES OF THE PROBLEM
Entrapped moisture content at substrate
SOLUTION
1: Cut bubbles with a spatula or a knife
2: Mop surface with STATUS LS-703 solvent
3: 3 – 4 hours later apply one coat of FLX 390 PU
4: When FLX 390 PU is dried (and not after 12 hours) proceed with application of FLX 390 TOP COAT
Products used:
Brushable Polyurethane Elastic membrane (1K)
Solvent
