Homepage > Products > Products
Tile Adhesives & Grouts

GLX 190

Adhesion primer for tiles & mozaic

GLX 190 is an adhesion primer, ready to use, suitable for enhancing the adhesion of tiles on very smooth, and non-absorbent surfaces.

Hue: Red

Packaging: 1, 5, 15 kg plastic containers

Consumption: 240-280 g/m² depending on the application thickness

Enlargement
TDS Download
Tile Adhesives & Grouts

GLX 190

Adhesion primer for tiles & mozaic

GLX 190 is an adhesion primer, ready to use, suitable for enhancing the adhesion of tiles on very smooth, and non-absorbent surfaces.

Hue: Red

Packaging: 1, 5, 15 kg plastic containers

Consumption: 240-280 g/m² depending on the application thickness

Description

GLX 190 is an adhesion primer, ready to use, suitable for enhancing the adhesion of tiles on very smooth, and non-absorbent surfaces. It consists of synthetic resin and quartz sand. It has very strong adhesion strength to several substrates and resistance to freezing and moisture. Suitable for indoor and outdoor use. After the application, creates a rough surface with resistant to alkaline conditions.

Application Fields

  • It is suitable for creating a suitable bonding key to old tiles and mosaics, where new tiles are going to be applied, on indoor or outdoor substrates. It also enhances the adhesion of the adhesives on smooth and low absorbance substrates.
  • It is applied over smooth substrates.
  • It is applied over wood, marble, natural stone
  • It is applied over cement board
  • It is applied over metal and industrial flooring
  • It is applied over PVC

Advantages

  • It does not contain organic solvents
  • Resistance to oils and solvents
  • Excellent workability
  • Strong adhesion and resistance to ageing
  • Excellent adhesion to substrate
  • After the application it creates a rough surface and increases the adhesion, even on the most demanding substrates

Application Steps

Step 1

The substrate must be clean, stable and free of grease and other pollutants. Remove with a tool, mud, adhesives and any remains from previous work. Also, clean if necessary and wash the wall. Remove any excess of water and leave the wall to dry before applying the product.

Step 2

Shake the container before use.

Step 3

Then apply the product on the surface with a soft brush, or roller, without dilution.

Step 4

For best results it is recommended to recoat the substrate using a second layer wet on wet.

Step 5

The surface is ready for use 12 hours after the application.

Step 6

It is recommended a trial application on a small area before use.

Storage

Stored in its original sealed package for 12 months from the production date, at temperatures between +5oC and +35oC.