GROUT ART FINE – Microcement on wall

“Impress with grout designs, turning the wall into a work of art”

Step 1: Apply a thin layer of DECOR, according to the desired shade for the background of the surface.

 

Step 2: Once the material is dried, rub the surface with wet (with clean water) sponged trowel, which will create the necessary conditions on the substrate for the applicator to create the desired style. Drying time for very thin layers is between 20-35 min and is affected by atmospheric conditions. For layers with larger thicknesses the time will increase accordingly.

Step 3:

Mix in an empty bucket clean water with the desired shade of tile grout (THRAKON FMF 150 colour chart). The amount you need depends on the needs of style and artistic mood you have. Spread the grout on to the prepared surface with a small spatula.
This is the phase where the applicator uses his abilities, so the spreading is irregular or specific, thicker or thinner.

Step 4: Then, you press the surface by using a rectangular stainless steel spatula, making semicircular or straight movements with your hands, in order to engage the grout with microcement and give a uniform decorative effect, with waves, lines or “bubbles”. Then again press the surface with a large rectangular smooth stainless steel spatula (American type) which is firstly wetted with clean water in order, to give a smooth final result. After a while and when material is dried you can be press the surface again after firstly spraying it with water for giving an even smoother result.

Product Categories : Microcement

Products used: