The coatings of THRAKON
are products made from marble and quartz sand. With the creation of a modern production facility, THRAKON is pioneering in its sector and supplies the market with a range of ready plasters (one and three levels) that cover all the requirements of European regulations and ensure the consumer the best possible result.
The raw materials with which the plaster is produced, are the most important factor to produce high-quality products. The quality of raw materials determines the strength of the plaster, the period of time, the tightness and texture of the end surface and above all the prevention of tearing.
Quartz sand
THRAKON pioneers by being the only company to use quartz sand for the production of products, exploiting all the advantages it offers in building mortars. The advantages of quartz sand used by THRAKON against sand of calcareous origin are:
- Compact density
- High resistance to bending
- Abrasion resistance
- Lower water absorption
- Corrosion protection
- Resistance to adverse weather conditions
- Resistance to long term stress
- Excellent workability
- It does not affect the chemical properties of the binder (cement, lime, resins, etc.)
Advice for the choice of proper plaster
In order to choose the most suitable plaster, all the following factors must be taken into account:
- type and surface condition to be plastered
- application thickness
- application site
- method of application
- appearance of the surface
- raw material (aggregate) production
