Soundproofing problems

POTENTIAL CAUSES OF THE PROBLEM

1. Poor soundproofing of the house

SOLUTION

1. Rub the surface and remove loose parts
2. Good cleaning of the surface
3. Prime the surface of application with quartz sand primer GLX 298
4. Application of thermal insulation plates on surface, gluing them with THC 403 adhesive. In this case, it is strongly suggested the application of EPS 200 or Rockwool. For even better results suggest combination cork and EPS
5. Application of pegs for holding thermal insulation plates
6. Apply the first layer of fiber-reinforced, base coat, THC 405
7. As long as THC 405 is still wet, firmly put CLIMAPLUS fiberglass mesh (160 g/m2)
8. Then, apply a second layer of fiber-reinforced, base coat, THC 405, in order to completely
9. cover the mesh
10. Prime the surface of application with the colored acrylic primer GLX 494 PRIM
11. Apply the organic acrylic based top coating DEC 428, tinted at the required shade chosen from CLIMAPLUS fan deck

ATTENTION: In case that the application is at a seaside area or area with high moisture content, THRAKON suggests the application of our silicone system. In such case, proceed to the following steps:

9: Prime the surface with the colored silicone based primer GLX 498 SIL PRIM

10: Application of organic silicone based top coating DEC 438, tinted at the required shade chosen from CLIMAPLUS fan deck

Moisture problems, mold on ceilings, walls and structural elements (columns, beams) around coastal areas

POTENTIAL CAUSES OF THE PROBLEM

a) Poor room ventilation

b) Collection of high moisture content in the field

c) Moisture problems from the exterior walls

SOLUTION

1. Rub the surface and remove loose parts
2. Good cleaning of the surface
3. Prime the surface of application with quartz sand primer GLX 298
4. Application of thermal insulation plates on surface, gluying them with THC 403 adhesive. In this case, it is strongly suggested the application of EPS 200 or XPS thermal insulation plates and the application of silicone organic plaster (DEC 438)
5. Application of pegs for holding thermal insulation plates
6. Apply the first layer of fiber-reinforced, base coat, THC 405
7. As long as THC 405 is still wet, firmly put CLIMAPLUS fiberglass mesh (160 g/m2)
8. Then, apply a second layer of fiber-reinforced, base coat, THC 405, in order to completely cover the mesh
9. Prime the surface of application with the colored acrylic primer GLX 494 PRIM
10. Apply the organic acrylic based top coating DEC 428, tinted at the required shade chosen from CLIMAPLUS fan deck

ATTENTION: In case that the application is at a seaside area or area with high moisture content, THRAKON suggests the application of our silicone system. In such case, proceed to the following steps:

9: Prime the surface with the colored silicone based primer GLX 498 SIL PRIM

10: Application of organic silicone based top coating DEC 438, tinted at the required shade chosen from CLIMAPLUS fan deck

Moisture problems, mold on ceilings, walls and structural elements (columns, beams)

POTENTIAL CAYSES OF THE PROBLEM

a) Poor room ventilation

b) Collection of high moisture content in the field

c) Moisture problems from the exterior walls

SOLUTION

1. Rub the surface and remove loose parts
2. Good cleaning of the surface
3. Prime the surface of application with quartz sand primer GLX 298
4. Application of thermal insulation plates on surface, gluying them with THC 403 adhesive
5. Application of pegs for holding thermal insulation plates
6. Apply the first layer of fiber-reinforced, base coat, THC 405
7. As long as THC 405 is still wet, firmly put CLIMAPLUS fiberglass mesh (160 g/m2)
8. Then, apply a second layer of fiber-reinforced, base coat, THC 405, in order to completely cover the mesh
9. Prime the surface of application with the colored acrylic primer GLX 494 PRIM
10. Apply the organic acrylic based top coating DEC 428, tinted at the required shade chosen from CLIMAPLUS fan deck

ATTENTION: In case that the application is at a seaside area or area with high moisture content, THRAKON suggests the application of our silicone system. In such case, proceed to the following steps:

9: Prime the surface with the colored silicone based primer GLX 498 SIL PRIM

10: Application of organic silicone based top coating DEC 438, tinted at the required shade chosen from CLIMAPLUS fan deck